|
ELECTRICIANS ASSISTANTS - Clayton North Carolina
Location: Clayton, North Carolina
Posted On: 04/24/2024
Job Description
Job Title : Helper - Electrical
Job Purpose : The overall objective of the job is to assist in the performance of the assigned work. Specific objectives are to:
1. Perform material handling and housekeeping functions
2. Work with other people and assure safety for self and coworkers
3. Read and understand documents (quality, checklist, procedures, ect.)
Job Functions :. Safely and effectively do the following :
1. Pulling conduit lines
2. Installing transformers, panels, switch gears, and contactors
3. Use Tape measure
4. Non power tools such as screw drivers and pliers
5. Use hand drill for installation purposes
6. Knowledge of ratchet or hydraulic crimping tools
Job Duties : Duties performed without direct supervision include the following. Other duties may be assigned.
1. Review drawings with leadman
2. Review drawings and refer any problem requiring changes to leadman
3. Be familiar with stock on hand and keep purchasing advised on shortages of supplies to minimize work slow down / stoppage
4. Insure all order materials are received, inspected, and stored in time and properly
5. Keep leadman updated on job progress
6. Be familiar with all items on the job shelves
7. Enforce standards for fabrication to ensure quality work from personnel
8. Pull, terminate, and phase wire
9. Install electrical fittings
10. Drilling ( hand held) holes/set up
11. Verify conformance of received material
12. Knowledge and ability to comply with company¿s safety standards, OSHA
standards, and EPA standards
13.Perform material handling and housekeeping functions
14.Retrieve and deliver supplies and equipment
15.Participate in group discussions such as job briefings
Job Qualifications : The following skills and abilities are essential for performing job functions in a safe and effective manner.
1. Must be able to read and understand posted bulletins, regulations, rule books, manufacturer manuals, and work instructions in English
2. Must be able to provide advisory/alert information, coordinate work, and describe nature of technical defects to coworkers.
3. Must be able to accurately transcribe numbers, letters, or words onto forms
4. Must be able to work in a team environment which requires cooperating with others, offering help when needed, and maintaining positive work relationships
5. Must be able to exert physical strength sufficient to lift/carry and push/pull objects weighing up to 50lbs.; perform work while bending and stooping; perform overhead work or sitting for more than one-half hour of every day
6. Some assignments may be performed out of doors
7. Must be willing to work shift assignments which may include variable shifts with overtime or weekends
Safety Responsibilities :
1. Gloves will be used at all times
2. Safety glasses are required on the shop floor
3. Steel toe shoes are required on the shop floor
4. PPE being worn and in serviceable condition
5. Area picked up / no trip hazards
6. Fire extinguishers and fire exits not blocked
7. Ladders serviceable
8. Face shields available and serviceable
9. Inspect all equipment and tools prior to use and report any discrepancies to your supervisor
3 DAYS ON 3DAYS OFF
SHIFTS - 6A-6:45 AND 7P-7:45A
45 MINUTE UNPAID LUNCH More...
Register an account with us and set up job agents! We'll email you immediately when jobs like this are posted on our site.
|
|