UTILITY SYSTEMS REPAIRER-OPERATOR with Security Clearance - Aurora Colorado

Company: Department of Defense
Location: Aurora, Colorado
Posted On: 04/30/2024

Duties - Operates electrical power plant AC and DC switchgear to control and distribute electrical power through primary and secondary electrical distribution systemsUtilizes established safety practices, rules, regulations, and procedures to maintain safe and clean work environment- Installs, modifies, inspects, trouble shoots, repairs, replaces and overhauls generators, diesel engines, electrical distribution switchgear, control components and other auxiliary equipment required for the operation of a 12 megawatt power plant consisting of four ea3000 KW generators, a remote 900 kilowatt power plant consisting of 1 ea850 KW generator set, and a remote 250 kilowatt power plant consisting of 1 ea250 KW generator set- Operates, installs, inspects, repairs, troubleshoots, replaces and or overhauls chillers and all chiller plant support equipment chiller plant consists of twelve chillers ranging from 1300 ton to 1000, eight cooling towers, water pumps up to 3100 GPM, electrical motors from fractional to 125 HP, pneumatic and electronic control systems, pneumatic valves, level controllers and other associated equipment used in the operation of the central chiller plants- Operates, installs, modifies, inspects, troubleshoots, repairs, replaces and overhauls large HVAC systems, HVAC subsystems and components such as large air handler units with capacities up to 138,200 CFM, hot water and steam boilers with capacities up to 4185 MBH, electric and pneumatic control systems, humidifiers, pumps, variable air volume (VAV) boxes, air conditioning units, evaporative coolers, steam valves, traps, gas/water valves and pressure regulators- Operates an Energy Management and Control System (EMCS) used to monitor and control all HVAC systems within the facilityStarts/stops equipment, does trend logs and graphs on equipment operation and adjusts control limits on HVAC systems and subsystems within the facilityRequirements Conditions of Employment--- U.SCitizenship Required--- Males must be registered for Selective Service, see www.sss.gov--- This posn is subject to provisions of the DoD Priority Placement Program--- Disclosure of Political Appointments--- Recruitment Incentive may be authorized for this position--- The employee may be required to work rotating shifts.--- The work may require the employee to drive a motor vehicleAn appropriate, valid driver's license may be required for the position.--- Occasionally is exposed to communicable disease or infectious matter when changing filters--- Certification in HFC/HCFC refrigerant processing is preferred, but not required--- Must be able to obtain and maintain a Top Secret security clearance--- The duties of this position meets all requirements as a cat4 desig, shall not be vacated during a national emergency or mobilization w/o seriously impairing the capability of the parent Federal Agency or office to function effectively--- Reserve and CAN NOT become a member of the Ready Reserve(TAW: DoDD 1200.7 "Screening the Ready Reserve")--- This is a Mission-Essential position performing a Mission-Critical-Function which must continue uninterrupted after the occurrence of an emergency and continued through full resumption of all functions.--- This position has been designated by the Air Force as a Testing Position (TDP) under the Air Force Civilian Drug Demand Reduction ProgramEmployee must pass initial and periodic short notice drug testing.--- Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety Qualifications In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118CQUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-4700 General Maintenance & Operations Work GroupAlthough a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applyingQualification requirements emphasis is on the quality of experience, not necessarily the length of timeThe screen out element for this position is the ability to do the work of a UTILITY SYSTEMS REPAIRER-OPERATOR without more than normal supervisionJOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1Knowledge of a wide variety of technical practices in order to perform operational repairs and preventive maintenance on boilers, auxiliary, and pollution control equipment; and of steam or high temperature hot water boiler plant equipment including single or multiple fuel power boilers fueled by coal, oil, refuse derived fuel, wood, natural gas, or a combination of these fuels; auxiliary pollution control; other auxiliary equipment and knowledge of associated safety regulations, practices, and procedures2Skill in the use of measuring instruments such as gauges, meters, recorders, analog displays, and computer generated data to determine operational status and make necessary adjustments and knowledge of associated safety regulations, practices, and procedures3Ability to interpret diagrams, drawings, operating manuals, or special facility procedures to be followed during emergencies, equipment failures, or system malfunctions4Ability to operate auxiliary equipment and pollution control equipment; to operate power boilers using computer-controlled equipment that produce steam or high temperature hot water; and to perform preventive maintenance and various operational repairs and knowledge of associated safety regulations, practices, and procedures5Skills in either Power Support System Mechanic or Air Conditioning Mechanical trade and knowledge of associated safety regulations, practices, and procedures6Ability to operate and maintain auxiliary equipment such as air compressors, pneumatic control systems, pumps and motors, refrigerant air dryers, batteries and battery chargers and knowledge of associated safety regulations, practices, and proceduresPART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time workYou must clearly identify the duties and responsibilities in each position held and the total number of hours per weekVOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social)Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employmentYou will receive credit for all qualifying experience, including volunteer experiencePHYSICAL EFFORT: Frequently works in confined areas in and around boilers and support equipment; e.g., auxiliary and pollution control equipmentWork requires moderate to strenuous physical effort and long periods of walking, kneeling, standing, climbing, bending, and crouchingFrequently lifts and carries boiler parts, equipment, and chemical supplies weighing up to 50 pounds unassisted and occasionally items weighing over 50 pounds with assistance of other workers or weight handling equipmentWORKING CONDITIONS: Employee normally works indoors on concrete surfacesOccasionally works outside for short periodsWhen working outside is subject to prevailing weather conditionsWorks on catwalks and laddersEmployee is subject to high temperatures, high noise, rotating machinery, soot, dirt, grease, chemicals, oil, and fumes in the work areaExposed to toxic effects of refrigerants and steam temperatures up to 115 degreesSubject to cuts and abrasions from use of tools and equipment and burns from acids, caustics, and contact with pipes and boilersWorking in close quarters or in high places is not unusualAdditional information Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this positionYou must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty locationEmployed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of AnnuitantsClick here for more information120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing dateApplicants may be referred for consideration as vacancies occurMilitary Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they appliedYou must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSPClick here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification ChecklistPriority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance levelYou must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eli More...

Register an account with us and set up job agents! We'll email you immediately when jobs like this are posted on our site.